snk26's blog

We are expiriencing problems in configuring of cacheratio param on HP
Smart Array P410. Battery installed. Lates firmware installed.
We are using hpacucli (hpacucli_8.35-7.0.3-5_amd64.deb) on Ubuntu 9.10


=> ctrl all show detail

Smart Array P410 in Slot 4
Bus Interface: PCI
Slot: 4
Serial Number: PACCR9SYN3PL
Cache Serial Number: PACCQ9SY952F
RAID 6 (ADG) Status: Disabled
Controller Status: OK
Chassis Slot:
Hardware Revision: Rev C
Firmware Version: 3.30
Rebuild Priority: Medium
Expand Priority: Medium
Surface Scan Delay: 15 secs
Queue Depth: Automatic
Monitor and Performance Delay: 60 min
Elevator Sort: Enabled
Degraded Performance Optimization: Disabled
Inconsistency Repair Policy: Disabled
Wait for Cache Room: Disabled
Surface Analysis Inconsistency Notification: Disabled
Post Prompt Timeout: 0 secs
Cache Board Present: True
Cache Status: Not Configured